Faber 3160-0 E-SERT Quality Steel Inserts Fits Epi Style Bridge Nickel

Description

Following up on the success of the innovative Faber® iNsert, we are happy to announce the new Faber® E-sert, for most Epiphone and many other Japanese and Asian made guitars. Now you can replace the tone robbing pot metal inserts in your guitar with the highest quality German steel, for a real and noticeable tone enhancement. This easy to install system, with 4mm threaded posts on the upper portion, will allow you to use the Faber® ABR-1 style ABRM model bridge, or the revolutionary ABRL “Tone-Lock” bridge. The E-sert includes one pair of STEEL studs, two thumbwheels, a hard plastic installation tool and an 8mm bolt to easily remove the old inserts. NOTE: The depths of the original insert holes are not consistent! Please measure the depth and insure that the holes are deep enough so that the E-sert will install flush with the guitar body. Below is a video showing installation of the Faber® iNsert, which is the exact procedure used for the E-sert.
Most Epiphone guitars
Many non USA made guitars
Most innovative solution available for guitars using the Epi style bridge system!
Material: Studs, Steel, plated; Thumbwheels, Brass, plated
Weight, with thumbwheels: 1.677 oz./47.55g
Overall length: 1.42” / 36.05mm
Length below flange: .78” / 19.85mm
Stud length, above flange: .59” / 15.08mm
Diameter, knurled section: .484” / 12.2mm
Diameter, below knurled section: .454” / 11.55mm
Flange diameter: .565” / 14.35mm
Flange thickness: .044” / 1.1mm
Thumbwheels: Diameter: .63"/16mm, Thickness: .11"/2.8mm